Le Noyer A, No. 23, 2nd floor, Ibn Sina, Guéliz, Marrakech +212 6 61 05 74 55 · +212 6 20 89 76 60 · sigma.icc@gmail.com
Home / Advice / Plumbing and sanitation / PEX, multilayer, PPR

PEX, multilayer, copper or PPR: which plumbing pipe to choose?

Four families of pipe share Moroccan building sites. None of them is bad, but each has its own installation rules and pitfalls.

Published 16 November 2026 · 3 min read · SIGMA ICC, engineering consultancy

For a new house in Morocco, welded PPR and press-fit multilayer are today the most common choices: they are reliable, easy to install and immune to corrosion. PEX in a manifold layout works very well for bathrooms, and copper remains a premium solution, more expensive and more demanding in labour. The right choice depends above all on the quality of installation.

The four materials at a glance

PipeJointingStrengthsWeaknesses
PPR (polypropylene)socket fusion welding (heating iron)welded joints with no mechanical fittings, very widespread in Morocco, economicalrigid, significant expansion with hot water, welds must be made carefully
Multilayer (PEX + aluminium + PEX)press or screw fittingsholds its shape, expands little, oxygen barriermore expensive fittings, pressing must be checked
PEX (cross-linked polyethylene)sliding-sleeve, press or compression fittingsflexible, laid in long runs without fittings, inexpensivesensitive to UV, expands, must be protected in a sleeve
Copperbrazing or press fittingswithstands high temperatures, durable, non-combustiblehigh price, requires skill, sensitive to some aggressive waters

How to choose according to use

  • Distribution inside walls and slabs: PEX or multilayer in a sleeve, with a manifold and one pipe per fixture (the so-called "manifold" or home-run layout). With no embedded fittings, the risk of a hidden leak is greatly reduced.
  • Risers and exposed runs: multilayer or PPR, which stay straight and can be fixed neatly.
  • Water heater outlet and solar circuit: copper or a material whose data sheet covers the maximum temperature reached. A solar collector can produce very hot water in summer in Marrakech: always check the pipe's permissible temperature and install a mixing valve.
  • Parts exposed to the sun (terrace, tank): never bare PEX; UV radiation degrades it. Use protected or sleeved pipes.

Common mistakes on site

  • Mixing brands of fittings and multilayer pipes: each system is designed for its own fittings.
  • Welding PPR without respecting the heating time or insertion depth: the weld looks fine but leaks after a few months.
  • Embedding fittings in the slab or wall without pressure-testing them first.
  • Forgetting the expansion of hot water pipes over long runs (expansion loops, fixed points).
  • Keeping old galvanised steel pipes during a renovation: they scale up and corrode from the inside.

Price: look at the installed cost

The price per metre of pipe is only part of the cost: fittings, tooling (fusion iron, press tool) and installation time weigh just as much. Compare quotes that describe the same system, from the same brand, with the same tests. For an overall picture, see our article on the cost of plumbing for a villa.

The engineering firm's view

The engineering firm selects the material according to temperatures, pressure, water quality and installation method, then writes it into the specifications along with the acceptance tests: pressure test before the chases are closed and flushing of the network. It is this inspection, more than the material, that guarantees a leak-free installation.

Frequently asked questions

What is the best pipe for a house's plumbing?

There is no absolute best: welded PPR and press-fit multilayer are the most widely used in Morocco, PEX in a manifold layout suits bathrooms well, and copper remains a durable but more expensive solution.

Can PEX be used outdoors?

Not without protection: PEX degrades under UV. Outdoors or on a terrace, it must be sleeved and shielded from the sun, or replaced with a suitable pipe.

Can PPR handle hot water?

Yes, there are PPR ranges for hot water, but you must check the pressure and temperature class on the data sheet and allow for its expansion.

A project in the pipeline?

SIGMA ICC designs reinforced concrete, electrical, plumbing and HVAC systems and supervises sites for villas, riads, hotels and shops.

Sources : Domomat, tube PER ou multicouche · La Maison Saint-Gobain, les bons tuyaux · Xpair, assemblage du tube multicouche · Générateur de prix Maroc, tubes multicouches.

Can we help you?

Click to call, or write to us: we answer 7 days a week for emergencies.

Chat on WhatsApp