An air conditioner that is too weak runs constantly without ever cooling; one that is too powerful runs in short cycles, dehumidifies poorly and costs more. For an ordinary room, a simple rule gives a good starting point; for a whole villa, a heat load calculation is essential.
The starting table
| Air conditioner capacity | Approximate cooling capacity | Indicative floor area |
|---|---|---|
| 9,000 BTU | about 2.6 kW | up to 20 to 25 m² |
| 12,000 BTU | about 3.5 kW | 25 to 35 m² |
| 18,000 BTU | about 5.3 kW | 35 to 50 m² |
| 24,000 BTU | about 7 kW | 50 to 70 m² |
These floor areas correspond to a room of ordinary height (about 2.7 m), properly insulated. Conversion benchmark: 1 kW is about 3,412 BTU/h.
What increases the need
- The climate: in Marrakech, summers often exceed 40 °C; allow a margin compared with tables drawn up for temperate climates.
- The top floor under an uninsulated roof terrace, which heats up all day.
- Large glazed openings facing south or west.
- Ceiling height: a double-height living room or a riad with a covered patio.
- Occupancy and equipment: open kitchen, many occupants, IT equipment.
Split, ducted or VRF?
- Wall-mounted split: simple and economical for a few rooms.
- Ducted: a unit hidden in a false ceiling that distributes air through grilles, more discreet for a villa.
- VRV / VRF: one outdoor unit and several indoor units controlled separately, suited to large villas, hotels and offices.
When to carry out a heat load study
For a villa, a riad, a hotel or a shop, the engineering firm calculates the heat gains room by room (walls, glazing, roof, occupants, equipment). It chooses the system, sizes the networks and electrical supplies, and avoids buying oversized units. Insulating the roof well and shading the glazing from the sun often reduces the required capacity more than any unit can.
Frequently asked questions
What air conditioner capacity for 20 m²?
A 9,000 BTU unit (about 2.6 kW) is generally suitable for a well-insulated 20 m² room; allow more under a roof terrace or with large sunny windows.
How many BTU for 30 m²?
For 30 m², the usual starting point is 12,000 BTU (about 3.5 kW), to be adjusted according to insulation and orientation.
Do you need a heat load study to air-condition a villa?
It is recommended: a room-by-room calculation avoids under- or oversized units and helps choose between split, ducted and VRF systems.
A project in the pipeline?
SIGMA ICC designs reinforced concrete, electrical, plumbing and HVAC systems and supervises sites for villas, riads, hotels and shops.