Rising damp is moisture from the ground that rises up the walls through the pores of the materials, like a wick. It is treated by cutting off the water's path: a waterproof barrier at the base of the walls (damp-proof course or injection), reducing the water around the foundations (drainage, falls) and plasters that let the wall dry out. Painting or applying cement render over it only moves the problem elsewhere.
Recognising it
- A damp band at the bottom of the walls, often up to about one metre high, with an irregular edge.
- Saltpetre: white, powdery deposits of salts crystallising on the surface.
- Plaster and paint that blister and peel off, skirting boards that rot.
- The problem persists in the dry season, unlike condensation or rain penetration.
Before any treatment, other causes must be ruled out: pipe leaks, penetration through the façade or roof terrace, condensation. A diagnosis with moisture measurements avoids treating the wrong cause.
Why old houses are affected
Recent buildings normally include a damp-proof course (waterproof layer) above the foundations or tie beams. Old houses, riads in the medina and rammed-earth or stone walls do not have one. The problem gets worse when these walls are covered with impermeable cement render or tiles, or when the level of the street or patio has been raised over the years.
The solutions
| Solution | Principle | Remarks |
|---|---|---|
| Water-repellent resin injection | Closely spaced holes drilled at the base of the wall, injection of a product that blocks the pores | Variable effectiveness depending on the wall; tricky in thick, heterogeneous walls |
| Physical damp-proof course (mechanical cut) | Insertion of a waterproof barrier into the wall, section by section | Effective but heavy work; to be assessed on a load-bearing wall |
| Perimeter drainage | Keep water away from the foundations | Useful if the soil is waterlogged or poorly drained |
| Lime plasters | Let the wall dry and the salts come out | Essential complement, particularly on rammed earth and stone |
Common mistakes
- Applying cement render or impermeable paint: the damp rises higher.
- Treating without correcting the external cause (gutter, watering against the wall, patio floor sloping towards the wall).
- Redoing the plaster immediately after an injection: the wall needs time to dry, often several months depending on its thickness.
- Watering planters or plants directly at the foot of the façades, which keeps the soil damp.
The role of the engineering firm
The engineering firm makes the diagnosis and chooses a solution compatible with the structure: on a load-bearing wall or traditional masonry, a poorly executed damp-proof course can weaken the wall. In new construction, it provides the damp-proof course above the tie beams. For a purchase, see also checking for damp before buying.
Frequently asked questions
How can you tell if it is rising damp?
The damp forms a band at the bottom of the walls, often with saltpetre, and persists in the dry season. A diagnosis must rule out leaks, penetration and condensation.
Is resin injection against damp effective?
It can be on homogeneous walls, but its effectiveness varies in thick, heterogeneous walls; it must be combined with eliminating the external causes.
What plaster for a damp riad wall?
A breathable lime plaster, which lets the wall dry; cement renders and impermeable paints make rising damp worse.
A project in the pipeline?
SIGMA ICC designs reinforced concrete, electrical, plumbing and HVAC systems and supervises sites for villas, riads, hotels and shops.
Sources : AQC, fiche pathologie remontées capillaires.